During assembly of the side am I not followed the instructions. The manual recommends that the parts stick together at the tips (that later Bug) with tape and then put on the fuselage. This is needed but 1) a full square feet on the table (about 95x95cm) and secondly we must then both sides of the fuselage above and below fix virtually simultaneously. That seemed an appropriate way of working for an octopus, but not for a person with only two hands. As you can see in the picture, I first fixed a sidebar / glued and after curing the second. It must be very accurate work. It is not as easy as it looks! The tip must be aimed at the bow perfectly, as it is really about one millimeter. The side must also - as the guide emphasizes - lie everywhere on the support legs. As has been shown in retrospect, this is for my model only in the front and rear of the case, but not in the middle. As "missing" me between 1-2 mm. This will be primarily a visual problem ...
